Continuous Memory Self-Test (Expanded Mode)

Turn ignition switch to OFF position. Ensure test equipment is properly attached. Program scan tool using the following steps:

• Select vehicle and engine selection menu. See Fig 1 .
• Select year, engine, model and any additional information requested by scan tool.
• Select DIAGNOSTIC DATA LINK.
• Select PCM - POWERTRAIN CTRL MODULE.
• Select DIAGNOSTIC TEST MODES.
• Select RETRIEVE/CLEAR CONTINUOUS DTCs.
• Turn ignition on.
• Follow operating instructions from scan tool menu.

Fig 1: Identifying New Generation Star (NGS) Main Menu & Mode Paths

Courtesy of FORD MOTOR CO.