LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1998 >> 626 DX, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Interior Trim) >> Column Cover Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Column Cover Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the upper column cover.
  3. Remove the ignition key illumination. (See IGNITION KEY ILLUMINATION BULB REMOVAL/INSTALLATION .)
  4. Remove the screws.
  5. Remove the lower column cover.
  6. Install in the reverse order of removal.
    Fig 1: Removing/Installing Column Cover
    G01344488Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals