LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1998 >> B2500 SE, 4D Pickup Extra Cab >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Power Circuit
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Circuit

  1. Power (PWR) circuit for PCM is located at PCM terminal No. 55 (Yellow wire). PCM is located in right rear of engine compartment. If PWR fuse circuit is open or shorted, a Diagnostic Trouble Code (DTC) should set. See TESTS W/CODES article and check for DTCs. If no DTC's are present, go to next step.
  2. To check PCM power circuit, measure voltage between ground and PCM connector terminal No. 55. See TEST EQUIPMENT under PIN VOLTAGE/PID VALUE CHARTS article for test equipment to be used.
  3. If battery voltage is not present, locate and repair open or short circuit between PCM connector and fuse No. 18 in engine compartment fuse/relay box. See appropriate wiring diagram in WIRING DIAGRAMS article.
scientia non olet · About LEMON Manuals