Testing With SST

1. Connect the SSTs to the data link connector-2.
2. Verify that the throttle valve is at the closed throttle position.
3. Turn the ignition switch to ON.
4. Select the PID/DATA MONITOR AND RECORD function of the NGS.




5. Select "TP V" on the NGS display. NGS measures and shows the voltage.

Specification
Closed throttle position: 0.1 - 1.1 V
Wide open throttle: 2.8 - 4.5 V
(Verify that the voltage increase is directly proportioned to the throttle valve opening angle.)

6. If not as specified, adjust the throttle position sensor.