LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1998 >> Millenia V6-2.5L DOHC >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Connector Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Connector Installation Note





1. Remove the rear heater duct fasteners.
2. Separate the rear heater duct to both sides.

NOTE
- Separating the duct may cause deformation to it. However, this will not affect the performance of the duct.

3. Disconnect the PCM connector.