LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1998 >> Protege DX, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Except B2500, B3000 & B4000 >> Ignition Control Module (MPV & Protege)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Control Module (MPV & Protege)

Check ignition coil, ECM/PCM and high-tension lead connections. Check secondary coil winding and high-tension lead resistance. Measure voltage between ground and appropriate ECM/PCM terminals. See ECM/PCM TERMINAL IDENTIFICATION  table. If all measurements are within specification, and misfire still occurs, replace distributor or ignition coil.

scientia non olet · About LEMON Manuals