LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1999 >> B2500 TL, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Cruise Control Systems) >> System Tests >> Test H: Set/ACCEL Switch Is Inoperative
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test H: Set/ACCEL Switch Is Inoperative

WARNING: This page is about a different car, the 2000 Mazda B4000, 2000 Mazda B3000, and 2000 Mazda B2500. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to LOCK position. Disconnect cruise control servo harness connector. While pressing cruise control SET/ACCEL switch, measure resistance between terminal No. 5 (Light Blue/Black wire) and terminal No. 6 (Dark Green/Orange wire) at cruise control servo harness connector. See Figure . If resistance is 612-748 ohms, replace cruise control servo. If resistance is not 612-748 ohms, replace cruise control switch. After repair, perform SELF-DIAGNOSTIC TEST  under SELF-DIAGNOSTIC SYSTEM.

scientia non olet · About LEMON Manuals