LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> 626 ES, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Sub-Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation: Sub-Switch

  1. Disconnect negative battery cable.
  2. Remove door trim panel. See REAR DOOR TRIM  .
  3. Remove screw(s) securing sub-switch to door trim panel.
    Fig 1: Removing Sub-Switch
    G00379134Courtesy of MAZDA MOTORS CORP.
  4. Pull out sub-switch and disconnect electrical connector.
  5. Remove sub-switch.
  6. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals