LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> 626 ES, Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Anti-Lock/Traction Control System >> Master Cylinder Disassembly/Assembly >> Stop Screw (Without Abs) Assembly Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Stop Screw (Without Abs) Assembly Note

  1. Install the secondary piston with the piston hole facing the stop screw.
  2. Install the new O-ring onto the stop screw.
  3. Install the stop screw.

    Tightening Torque 

    6.9-9.8 N.m {70-100 kgf.cm, 60.8-86.8 in.lbf} 

  4. Push and release the secondary piston assembly to verify that it is held by the stop screw.
    Fig 1: Setting Stop Screw (Without ABS)
    G01135693Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals