LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> 626 ES, Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock/Traction Control System >> Fluid Level Sensor Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fluid Level Sensor Inspection

  1. Disconnect the sensor connector.
  2. Connect an ohmmeter to the connector.
  3. Starting with the fluid level above MIN, verify that there is no continuity.
  4. Remove the brake fluid and verify that there is continuity when the level is below MIN.
    • If not as specified, replace the sensor.
    Fig 1: Fluid Level Sensor Continuity Table & Connector View
    G01135691Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals