LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> 626 ES, Standard >> Repair and Diagnosis >> Brakes >> Anti-Lock/Traction Control System >> Brake Switch Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Brake Switch Inspection

  1. Disconnect the brake switch connector.
  2. Inspect for continuity between the terminals of the brake switch connector by using the circuit tester.
    • If not as specified, replace the brake switch.
      Fig 1: Brake Switch Continuity Table
      G01135679Courtesy of MAZDA MOTORS CORP.
    Fig 2: Checking Brake Switch Continuity & Connector View
    G01135680Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • Terminals C and D are used for the cruise control system.
scientia non olet · About LEMON Manuals