LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Seats) >> Power Seat Switch Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Seat Switch Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the power seat switch connector.
  2. Remove the seat back trim. (See FRONT SEAT DISASSEMBLY/ASSEMBLY .)
  3. Disconnect the recliner motor connector.
  4. Remove the seat cushion trim. (See FRONT SEAT DISASSEMBLY/ASSEMBLY .)
  5. Disconnect the rear tilt motor connector.
  6. Inspect for continuity between the power seat switch, recliner motor connector, and rear tilt motor connector terminals using an ohmmeter.
    • If not as specified, replace the power seat switch.
    Fig 1: Identifying Power Seat Switch Terminals Continuity Specifications, Circuit, Terminals & Connector Views
    G02564143Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals