LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> MPV LX >> Repair and Diagnosis >> Brakes >> Anti-Lock/Traction Control System >> Abs HU/Cm Inspection >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Abs HU/Cm Inspection: Notes

  1. Remove the battery and battery tray.
  2. Connect the SST between the ABS/TCS HU/CM (with TCS) or ABS HU/CM (without TCS) and harness connector with the ignition switch off.
  3. Attach the tester leads to the SST  to inspect voltage by referring to the table below.
    CAUTION: In the event that the vehicle is to be inspected while it is being driven, make sure that the SST harness does not interfere with parts in the engine room.
Fig 1: Connecting SST Test Harness Connector
G01196979Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals