LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Upper Arm Removal/Installation >> Dust Boot Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Dust Boot Installation Note

  1. Fill the inside of the new dust boot with grease.
  2. Press the dust boot on using a 1.18" (30 mm) socket until the dust boot contacts the seat.
    CAUTION: Install the dust boot squarely and do not press excessively. The inner metal ring will be deformed if not done correctly.
  3. Verify that the clearance between the boot and the seat is less than 0.04" (1 mm).
Fig 1: Installing Dust Boot
G00356776Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals