LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> Protege DX, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Lower Arm >> Removal/Installation >> Dust Boot Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Dust Boot Installation Note

  1. Wipe the grease off the ball stud.
  2. Fill the inside of the new dust boot with grease.
  3. Press the boot onto the ball joint using the SST.
    Fig 1: Installing Dust Boot
    G00356812Courtesy of MAZDA MOTORS CORP.
  4. Wipe away the excess grease.
scientia non olet · About LEMON Manuals