LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> Protege ES, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System & Keyless Entry System >> Keyless Control Module Removal/Installation >> 5HB
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Keyless Control Module Removal/Installation: 5HB

  1. Disconnect the negative battery cable.
  2. Disconnect the keyless control module connector (under driver's side dash).
  3. Remove the bolt to remove the keyless control module and the bracket as a module.
    Fig 1: Removing/Installing Keyless Entry Control Module (5HB)
    G01186238Courtesy of MAZDA MOTORS CORP.
  4. Remove the screw.
  5. Push the stopper using a small driver, and remove the bracket.
    Fig 2: Removing/Installing Keyless Entry Control Module Bracket (5HB)
    G01186239Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals