LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> Protege ES, Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical 2.0L >> Intake-Air System Removal/Installation >> Installation Notes >> Accelerator Cable Installation Note >> Accelerator Cable Adjustment
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Accelerator Cable Adjustment

  1. Move the white locking tab "A" to the unlock position.
    Fig 1: Adjusting Accelerator Cable
    G01187323Courtesy of MAZDA MOTORS CORP.
  2. Turn stopper B to the unlock position.
    NOTE: Note If the stopper "B" will not be unlocked, it may be necessary to carefully bend the tab "C" out using a suitable tool.
  3. To adjust the free play, push or pull the accelerator cable housing directly behind the spring.
  4. Turn the stopper "B" to the lock position.

    Free Play 

    1-3 mm {0.04-0.11 in} 

  5. Measure the throttle cable free play, making sure that it is within the specification.
  6. Move the white locking tab "A" to the lock position.
  7. Verify correct accelerator operation.
scientia non olet · About LEMON Manuals