LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> Protege LX, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Generators & Regulators >> Self-Diagnostic System >> Retrieving/Clearing Diagnostic Trouble Codes >> Using Scan Tool
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Using Scan Tool

  1. Connect the Worldwide Diagnostic System (WDS), or equivalent scan tool, to the vehicle DLC-2 16-pin connector located under the dash, left of the steering column.
  2. Retrieve/clear the DTCs using the WDS. If any DTCs are retrieved, perform appropriate diagnostic test. For 2002 models, see DIAGNOSTIC TROUBLE CODE DEFINITIONS , or for 2003 models, see DIAGNOSTIC TROUBLE CODE DEFINITIONS in SELF-DIAGNOSTICS article in ENGINE PERFORMANCE. If no DTCs are present, perform appropriate ON-VEHICLE TESTS  .
scientia non olet · About LEMON Manuals