Door Lock-Link Switch Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The door lock-link switch is together with the driver-side door lock actuator.

Remove the driver-side door trim.
Turn the door screen over.
Disconnect the door lock-link switch connector.
Inspect for continuity between the door lock-link switch terminals using an ohmmeter.
- If not as specified, replace the door lock actuator.
Fig 1: Inspection Table
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Continuity Between Door Lock-Link Switch Terminals
Courtesy of MAZDA MOTORS CORP.