Interior And Map Light Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Remove the interior and map light. (See INTERIOR AND MAP LIGHT REMOVAL/INSTALLATION .)
Inspect for continuity between the interior and map light terminals using an ohmmeter.
- If not as specified, replace the interior and map light.
Fig 1: Interior And Map Light Terminals Continuity Reference Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Interior And Map Light Circuit & Connector View
Courtesy of MAZDA MOTORS CORP.