LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> 6 L4-2.3L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Console >> Service and Repair >> Procedures >> Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal/Installation

CONSOLE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. For manual trans. vehicle, remove the shift lever knob.




3. Remove the panel No.1 using a tape-wrapped screwdriver.
4. Remove the panel No.2 using a tape-wrapped screwdriver, disconnect the cigarette lighter connector, and remove the front ashtray illumination.
5. Remove the bolts.
6. Disconnect the accessory socket connector.
7. Install in the reverse order of removal.