LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> B2300 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Power Steering System) >> Steering Gear Boot >> Removal & Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal & Installation

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the steering gear boot cover aside.
    Fig 1: Positioning Steering Gear Boot Cover Aside
    G01152483Courtesy of MAZDA MOTORS CORP.
    2. NOTE: The nut cannot be reused. Install a new nut.
  2. Disconnect the steering column shaft from the flexible coupling.
    1. Remove and discard the nut.
    2. Disconnect the steering column shaft from the flexible coupling.
      Fig 2: Disconnecting Steering Column Shaft
      G01152484Courtesy of MAZDA MOTORS CORP.
  3. Remove the steering gear boot.
    1. Remove the nuts.
    2. Remove the steering gear boot.
    Fig 3: Removing Steering Gear Boot
    G01152485Courtesy of MAZDA MOTORS CORP.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals