Inspection Of DTCS For Operation Mode: Notes
NOTE:
- The cruise set indicator light will illuminate for 3 seconds , when operation mode is on.
- If the cruise set indicator light does not illuminate for 3 seconds
(Operation mode is not on), the following may be the cause of the malfunction:
- Cruise actuator ignition power supply fuse
- Cruise set indicator light power supply fuse
- Cruise control switch
- Cruise control main switch
- Clock spring for air bag system
- Print plate in instrument cluster
- Cruise set indicator light bulb
- Cruise actuator
- Open or short circuit in following wiring harnesses:
- Between cruise set indicator light and cruise actuator terminal G
- Between fuse block and cruise actuator terminal L
- Between fuse block and instrument cluster
- Between cruise actuator terminal B and DLC (using the WDS or equivalent only)
- Between cruise actuator and clock spring
- Between clock spring and cruise control switch
- Open circuit in following wiring harnesses:
- Between cruise actuator terminal I and ground
- Between clock spring and ground