Neutral Switch Removal/Installation
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the neutral switch.
- Apply a light coat of silicone sealant to the screw of the neutral switch.
Sealant
Three Bond product: TB1215
- Install the neutral switch to the transaxle case.
Tightening torque
22.5-33.3 N.m
{2.3-3.4 kgf.m, 16.6-24.6 ft.lbf}