LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege DX, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Door Key Cylinder Switch Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Door Key Cylinder Switch Removal/Installation

  1. Close the door glass completely.
  2. Disconnect the negative battery cable.
  3. Remove the passenger-side front door trim.
  4. Remove the door screen.
  5. Release the outer handle and the door key cylinder installation rods.
  6. Disconnect the door key cylinder switch connector.
  7. Remove the door key cylinder switch.
    Fig 1: Removing Door Key Cylinder Switch
    G01915142Courtesy of MAZDA MOTORS CORP.
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals