LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege L4-2.0L DOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Keyless Entry Module >> Service and Repair >> Hatch Back
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Hatch Back

KEYLESS CONTROL MODULE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.




2. Disconnect the keyless control module connector. (Under driver's side dash)
3. Remove the bolt to remove the keyless control module and the bracket as a module.




4. Remove the screw.
5. Push the stopper using a small driver, and remove the bracket.
6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals