LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege Mazdaspeed >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0703: Brake Switch Input Circuit Malfunction >> Detection Condition
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Detection Condition

DTC is set when PCM has not received a change in brake switch signal while vehicle is accelerating and decelerating 10 times repeatedly. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is available if PCM detects malfunction condition during first drive cycle. Freeze Frame Data is available and DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals