LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege5 Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Shift Mechanism >> Selector Lever Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Adjustment

  1. Remove the center console.
  2. Shift the selector lever to the P position.
  3. Unlock the lock piece of the selector cable (selector lever side) in the order shown in the figure.
  4. Verify that the manual shaft is at the P position.
    Fig 1: Adjusting Procedure Selector Lever (1 Of 2)
    G01914521Courtesy of MAZDA MOTORS CORP.
  5. Lock the lock piece of the selector cable (selector lever side) in the order shown in the figure.
  6. Install the center console.
  7. Shift the selector lever from P position to 1 range (4AT)/M range (Sport AT), and make sure that there are no other components in that area to interfere with the lever.
    Fig 2: Adjusting Procedure Selector Lever (2 Of 2)
    G01914522Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals