LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 i, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 450 (Differential) >> Rear Differential Assembly >> Bearing Cap Assembly Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Bearing Cap Assembly Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the bearing cap alignment marks and assemble the bearing cap with the arrow facing outward.

    Tightening torque 

    1. 72.6-106.9 N.m 
      1. {7.41-10.91 kgf.m, 53.5-78.84 ft.lbf} 
    Fig 1: Aligning Bearing Cap Alignment Marks
    G03702320Courtesy of MAZDA MOTORS CORP.
  2. Perform the drive pinion and ring gear tooth contact inspection.
scientia non olet · About LEMON Manuals