LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 i, Standard >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Cooling System >> Radiator Removal/Installation >> Radiator Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Radiator Removal Note

  1. Remove the condenser from the radiator with the pipes still connected, by pressing the radiator side tab to unlock tab b on the condenser.
    Fig 1: Removing Condenser
    G00972676Courtesy of MAZDA MOTORS CORP.
  2. Remove rubber mount A from the mount installation hole.
    Fig 2: Removing Rubber Mounts
    G00972677Courtesy of MAZDA MOTORS CORP.
  3. Tilt the radiator to the engine side.
  4. Remove rubber mount B from the mount installation hole.
  5. Remove the radiator from below.
scientia non olet · About LEMON Manuals