LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 i, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System >> Heated Oxygen Sensor (Ho2S) Removal/Installation >> Wiring Harness Bracket Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Wiring Harness Bracket Installation Note

NOTE:
  • There might be no pin. If there is no pin, lock the wiring harness bracket against rotation and tighten the nut.
    Fig 1: Locating Wiring Harness Bracket & Pin
    G00972631Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals