LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 i, Standard >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Registration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tire Pressure Sensor Registration

  1. Turn ignition switch to ON position, then turn it back to LOCK position.
  2. Leave the vehicle with the engine off, and wait for about 15 minutes.
  3. After about 15 minutes, drive vehicle at a speed of at least 16 mph (25 km/h) for 10 minutes or more. Tire pressure sensor ID signal code will be registered automatically.
    NOTE: If vehicle is driven within 15 minutes of changing tires, the warning light will flash because the sensor ID signal code would not have been registered. If this happens, park the vehicle for about 15 minutes, after which sensor ID signal code will register upon driving vehicle for 10 minutes or more.