LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 s, 4D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System >> Crankshaft Position (CKP) Sensor Inspection >> Resistance Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Resistance Inspection

  1. Disconnect the CKP sensor connector.
  2. Measure the resistance between CKP sensor connector terminals A and B.
    • If not within the specification, replace the CKP sensor.
    • If the monitor item status/specification (reference) is not within the specification, even though the resistance is within the specification, perform the Circuit Open/Short Inspection , and repair or replace the malfunctioning part.
  1. Resistance 400-550 ohms 
scientia non olet · About LEMON Manuals