LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security System And Locks System >> Keyless Control Module Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Keyless Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the map light. (See MAP LIGHT REMOVAL/INSTALLATION .)
  3. Disconnect the keyless control module connector.
  4. Remove the screw, then remove the keyless control module.
  5. Install in the reverse order of removal.
  6. When replacing the keyless control module, register the transmitter ID codes. (See TRANSMITTER ID CODE REGISTRATION .)
    Fig 1: Removing/Installing Keyless Control Module
    G00974234Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals