October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Load Compensation Inspection
- Start the engine and run is at idle.
- Connect the WDS or equivalent to the DLC-2.
- Verify that P0506, P0507 or P0511 are not displayed.
- If P0506, P0507 or P0511 are displayed, perform DTC inspection. (See
DTC TABLE
.)
- Select the RPM PID.
NOTE:
- Excludes temporary idle speed drop just after the loads are turned on.
- Verify that the engine speed is within the specification under each load condition.
- If not as specified at specific load condition, inspect the following: