LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> B2300 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> Crankshaft Position (CKP) Sensor Removal/Installation - 2.3L >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Position (CKP) Sensor Removal/Installation - 2.3L: Installation

Fig 1: Installing CKP - 2.3L
G01937889Courtesy of MAZDA MOTORS CORP.
  1. Install a new CKP, but do not tighten the bolts at this time.
    Fig 2: Adjusting CKP With Crankshaft Position Sensor Alignment Jig And Tighten Bolts - 2.3L
    G01937890Courtesy of MAZDA MOTORS CORP.
  2. Adjust the CKP with the Crankshaft Position Sensor Alignment Jig and tighten the bolts.
    Fig 3: Connecting CKP Electrical Connector - 2.3L
    G01937891Courtesy of MAZDA MOTORS CORP.
  3. Connect the CKP electrical connector.
    Fig 4: Removing M6 Bolt - 2.3L
    G01937892Courtesy of MAZDA MOTORS CORP.
  4. Remove the M6 bolt.
    Fig 5: Removing Special Tool - 2.3L
    G01937893Courtesy of MAZDA MOTORS CORP.
  5. Remove the special tool.
    Fig 6: Installing Plug For Crankshaft Timing Peg - 2.3L
    G01937894Courtesy of MAZDA MOTORS CORP.
  6. Install the plug for the crankshaft timing peg.
    Fig 7: Installing Bolt - 2.3L
    G01937895Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals