LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> B2300 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> Crankshaft Position (CKP) Sensor Removal/Installation - 2.3L >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Position (CKP) Sensor Removal/Installation - 2.3L: Removal

  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle.
    Fig 1: Disconnecting Crankshaft Position (CKP) Sensor Electrical Connector - 2.3L
    G01937884Courtesy of MAZDA MOTORS CORP.
  3. Disconnect the crankshaft position (CKP) sensor electrical connector.
    Fig 2: Removing Plug For Crankshaft Timing Peg - 2.3L
    G01937885Courtesy of MAZDA MOTORS CORP.
  4. Remove the plug for the Crankshaft Timing Peg.
    Fig 3: Installing Special Tool - 2.3L
    G01937886Courtesy of MAZDA MOTORS CORP.
  5. Install the special tool and turn the crankshaft pulley bolt to position the number one cylinder at top dead center.
    Fig 4: Removing CKP - 2.3L
    G01937887Courtesy of MAZDA MOTORS CORP.
  6. Install the M6 bolt (1F2012-428).
  7. Remove the CKP.
    Fig 5: Installing M6 Bolt - 2.3L
    G01937888Courtesy of MAZDA MOTORS CORP.
  8. Install an M6 bolt.
scientia non olet · About LEMON Manuals