LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> B2300 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Fuel System >> Spring Lock Couplings >> Connect Note
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Connect Note

  1. Inspect and clean both the coupling ends.
    Fig 1: Inspecting And Cleaning Both Coupling Ends
    G01937610Courtesy of MAZDA MOTORS CORP.
  2. Connect the fitting by inserting the male end into the female end of the fitting. Push the fitting together until the garter spring is engaged.
    Fig 2: Connecting Fitting By Inserting The Male End Into Female End Of Fitting
    G01937611Courtesy of MAZDA MOTORS CORP.
  3. Pull on the fitting to make sure it is fully engaged.
    Fig 3: Verifying Proper Fitting
    G01937612Courtesy of MAZDA MOTORS CORP.
  4. Install the safety clip.
    Fig 4: Installing Safety Clip
    G01937613Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals