LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> B4000 Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission System >> Dust Separator Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Dust Separator Removal/Installation

  1. Remove the evaporative emission canister. See EVAPORATIVE EMISSIONS CANISTER REMOVAL/INSTALLATION  .
  2. Disconnect the canister vent solenoid hose assembly.
    Fig 1: Removing EVAP Dust Separator - 2.3L
    G01937747Courtesy of MAZDA MOTORS CORP.
  3. Remove the EVAP dust separator.
    Fig 2: Installing EVAP Dust Separator - 2.3L
    G01937748Courtesy of MAZDA MOTORS CORP.
  4. Install in reverse order of removal.
  5. Perform Leak Test. See EVAPORATIVE EMISSION SYSTEM LEAK TEST  .
  6. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle Test. See DRIVE CYCLES .
scientia non olet · About LEMON Manuals