LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> B4000 Dual Sport, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System >> Swirl Control Solenoid Removal/Installation - 2.3L
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Swirl Control Solenoid Removal/Installation - 2.3L

  1. Disconnect the negative battery cable. See BATTERY DISCONNECT .
    Fig 1: Removing Intake Manifold Runner Control Actuator - 2.3L
    G01937907Courtesy of MAZDA MOTORS CORP.
  2. Remove the intake manifold runner control actuator.
    1. Disconnect the electrical connector.
    2. Disconnect the vacuum lines.
    3. Remove the bolt and the IMRC actuator.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals