LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Selector Cable Adjustment
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Selector Cable Adjustment

  1. Remove the column cover.
  2. Shift the selector lever to P position.
  3. Loosen nut A shown in the figure.
    Fig 1: Locating Selector Cable Adjusting Nut
    G00993745Courtesy of MAZDA MOTORS CORP.
  4. Pull the selector lever to the R position side gate of P position, and tighten nut A.

    Tightening Torque 

    16-22 N.m {1.6-2.3 kgf.m, 12-16 ft.lbf} 

  5. Verify that the selector lever bolt end is exposed from the nut.
    Fig 2: Verify Selector Lever Bolt End Exposed
    G00993746Courtesy of MAZDA MOTORS CORP.
  6. Install the column cover.
scientia non olet · About LEMON Manuals