October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance Inspection

Turn the ignition switch to LOCK.
Disconnect the knock sensor connector.
Measure the resistance between the knock sensor terminals A and B.
- If not as specified, replace the knock sensor.
- If the knock sensor is okay, but PID value or PCM terminal 57 and 66 voltage are out of specification, perform the "Circuit Open/Short Inspection."
  Specification
  
  Approx. 560 kilohms (20 °C {68 °F})