October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Back-Up Current
CAUTION:
Operating electrical loads while measuring the back-up current can damage the circuit tester.
- Verify that the ignition switch is off and that the ignition key has been removed.
- Disconnect the negative battery cable.
- Measure the back-up current between the negative battery terminal and the negative battery cable.
- If the current exceeds 20 mA, remove the fuse in the main fuse block and the fuse block one by one while measuring the back-up current. See Figure and Figure
.
- Inspect and repair harnesses and connectors of the fuse at which the current reduces.