LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> MPV LX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Service) >> O/D Off Switch Removal/Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

O/D Off Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the steering wheel. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
  3. Remove the column cover.
  4. Remove the combination switch.
  5. Disconnect the connector.
  6. Remove the selector lever component.
  7. Install the selector lever component.

    Tightening Torque 

    7.9-10.7 N.m {80-110 kgf.cm, 69.5-95.4 in.lbf} 

  8. Connect the connector.
  9. Install the combination switch.
  10. Install the column cover.
  11. Install the steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
  12. Connect the negative battery cable.
scientia non olet · About LEMON Manuals