LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security System And Locks System >> Keyless Control Module Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Keyless Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
  3. Disconnect the keyless control module connector.
  4. Remove the nut to remove the keyless control module and the bracket as a module.
    Fig 1: Removing Keyless Control Module
    G00997306Courtesy of MAZDA MOTORS CORP.
  5. Remove the screw.
    Fig 2: Removing Bracket Screw
    G00997307Courtesy of MAZDA MOTORS CORP.
  6. Remove the bracket.
  7. Install in the reverse order of removal.
    Fig 3: Removing Bracket
    G00997308Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals