LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Power Steering System >> Steering Gear And Linkage Disassembly/Assembly >> Tie-rod End Boot Assembly Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Tie-rod End Boot Assembly Note

  1. Wipe the grease off the ball joint.
  2. Put a small amount of lithium-based grease into a new dust boot.
  3. Install the dust boot onto the tie-rod end using the SST  and a press.
  4. Wipe away any excessive grease.
    Fig 1: Installing Tie-Rod End Boot
    G00997853Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals