LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> DRL Control Module Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DRL Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the connectors.
  3. Remove the screw and then remove the DRL control module.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing DRL Control Module
    G01344586Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals