Battery Inspection: Battery
- Inspect the battery as follows:BATTERY SPECIFICATION
Step Inspection Action 1 Measure the battery positive voltage. 12.4 V or more Go to Step 3. Less than 12.4 V Go to the next step. 2 Quick charge for 30 min and recheck voltage. 12.4 V or more Go to the next step. Less than 12.4 V Replace the battery. 3 Using the battery load tester, apply load current (see TEST LOAD CHART ) and record battery voltage after 15 s. Is voltage more than specification? Yes Normal No Replace the battery.
TEST LOAD CHART
| Battery | Current load (A) |
|---|---|
| 75D23L | 195 |
STANDARD SPECIFICATION
| Battery temp. (°C {°F}) | Minimum voltage (V) |
|---|---|
| 4 {39} | 9.3 |
| 10 {50} | 9.4 |
| 16 {61} | 9.5 |
| 21 {70} | 9.6 |