LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 N >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Auto Leveling Control Module Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Auto Leveling Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the connector.
  3. Remove the screw and then remove the auto leveling control module.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing Auto Leveling Control Module
    G01344576Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals