LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 N >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Trunk Key Cylinder Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Trunk Key Cylinder Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  3. Detach the rod.
    Fig 1: Removing/Installing Trunk Key Cylinder
    G01344437Courtesy of MAZDA MOTORS CORP.
  4. Remove the nuts, then remove the trunk key cylinder.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals